MississippiInsurance Appraiser (844) 537-1427

Free calculator

Roof Pitch & Squares Calculator for Storm Claims

Short measurements are one of the most common reasons roof claims come up light. Enter the footprint and pitch to estimate real surface area, squares, bundles and drip-edge footage.

Roof pitch & squares calculator

Check the carrier’s measurements
How will you measure?
Use a local contractor’s quote for a rough figure.
Roof squares before waste0
Pitch multiplier
1.000
Roof surface area
0
Squares to order (with waste)
0
Shingle bundles (3 per square)
0
Eave perimeter (drip edge / starter)
—
Rough replacement cost
—

For planning only. Results depend on the figures you enter and your policy’s terms. They aren’t a quote, an appraisal or legal advice. Nothing you type is stored or sent.

The pitch multiplier

A sloped roof has more surface than the ground it covers. The multiplier is √(1 + (rise ÷ 12)²): a 6/12 roof is about 11.8% larger than its footprint, an 8/12 roof about 20.2% larger, and a 12/12 roof about 41.4% larger. Leave that out and a 30-square roof can be written as 25.

What to compare in the carrier’s estimate

  • Total squares and the waste percentage on the shingle line.
  • Steep charges (often starting at 7/12) and high-roof charges for two-story sections.
  • Separate lines for starter, ridge cap, drip edge, valley metal and ice-and-water shield.
  • Removal, felt or synthetic underlayment, and decking replacement where boards are damaged.

Differences of more than 5–10% in squares deserve a closer look. Hail and wind claims in North Mississippi and the Pine Belt often turn on exactly these lines — see our roof and hail claim appraisal page.

Limits of a footprint method

Roofs with several pitches, dormers and valleys should be measured plane by plane, from an aerial report or in the field. Use this calculator as a sanity check, not a replacement for measurement.

About this calculator

What is a roofing square?

One hundred square feet of roof surface. Many single-story Mississippi homes fall between 20 and 35 squares.

Why does the waste factor change with roof shape?

Hips, valleys and dormers need more cutting, so more material ends up as scrap. Simple gables waste the least.

More free calculators

Want a professional to check the numbers?

Send the carrier’s estimate and we’ll review it line by line.

Call now Free claim review